6" Rewindable Motors
6" Rewindable Motors
These 6" rewindable motors are built for dependable operation in 6" diameter or larger water wells.
Water lubricated thrust and radial bearings enable a maintenance-free operation. A special diaphragm ensures pressure compensation inside the motor. The motor is filled with a special FES93 fluid, providing frost protection down to -15 ºC storage temperature.
The Sandfighter® SiC seal system is the option for sandy applications. For applications in aggressive media, motors made of 316SS and 904L are available.
-
Specifications:
- Cable material according to drinking water regulations (KTW approved)
- VFD operation is possible up to a supply voltage of 460V and with PE2/PA (in compliance with the application guidelines in the motor operating instructions and the VFD manufacturer). For VFD operation with higher voltages, please consult Franklin Electric.
- Sand slinger and mechanical seal for high performance in sand
- High efficiency electrical design for low operation cost
- All motors prefilled and 100 % tested
- Max. storage temperature -15 °C - + 60 °C
- Design for retrofitable PT100 sensor
- Approved Franklin Electric Kingsbury type thrust bearing
- Non contaminating FES 93 filling
- Sand fighter® SiC seal system is standard
- Standard Motors complete 304SS
Technical Specifications:
- 6-inch NEMA flange with Studs (M 12)
- Protection: IP 68
- Starts per hour: max. 20
- Installation orientation: Vertical / horizontal (shaft end heightened) - 37kW motors may not be installed horizontally (if required please contact Franklin Electric)
- Motor Lead in 4 m length (KTW approved)
- Voltage tolerance 50 Hz: +6 % / -10 %
- (Standard: 415 + 6 % = 440 V, 380 – 10 % = 342 V)
- Voltage tolerance 60 Hz: +/-10 %
- Standard: 460 + 10 % = 506 V, 460 –10 % = 414 V)
- Motor protection: Select thermal overloads according to EN 61947-4-1
- DOL / YΔ - start (pos. of cables 90°)
- Standard motor with PPC winding insulation (37 kW in standard with PE2/PA insulation) for max. ambient temp. of 30 ºC with a min.cooling flow:
- 4 kW - 15 kW v = 0.2 m/s
- 18.5 kW - 37 kW v = 0.5 m/s
Options
- Other voltages
- Motors in complete 316SS and 904 L
- Motors up to 30kW with PE2/PA winding insulation for max. ambient temp. of 50 °C at the same cooling conditions as standard (37 kW max. 4 5°C)
- PT 100 temperature sensor (sold separately)
- Lead in different lengths up to 50 m
-
6" Rewindable Motors 50-60 Hz Model Numbers*
PN
[kW]UN / f
[V] / [Hz]Model Number
Digit 1 – 6Model Number
Digit 7 – 10DOL YΔ 304SS 316SS 904L PE2/PA** 4 380 - 415 / 50
460 / 60262 610 262 710 8611 6611 7611 *7**
ONLY DOL380/ 60 262 660 262 780 230 / 60 262 600 262 720 5.5 380 - 415 / 50
460 / 60262 611 262 711 8611 6611 7611 *7**
ONLY DOL500 / 50 262 511 262 811 380/ 60 262 661 262 781 230 / 60 262 601 262 721 7.5 380 - 415 / 50
460 / 60262 612 262 712 8611 6611 7611 *7**
ONLY DOL500 / 50 262 512 262 812 380/ 60 262 662 262 782 230 / 60 262 602 262 722 9.3 380 - 415 / 50
460 / 60262 231 262 331 8611 6611 7611 *7**
ONLY DOL500 / 50 262 271 262 371 380/ 60 262 221 262 321 230 / 60 262 211 262 311 11 380 - 415 / 50
460 / 60262 613 262 713 8611 6611 7611 *7**
ONLY DOL500 / 50 262 513 262 813 *7** 380/ 60 262 663 262 783 230 / 60 262 603 262 723 13 380 - 415 / 50
460 / 60262 232 262 332 8611 6611 7611 *7**
ONLY DOL500 / 50 262 272 262 372 *7** 380/ 60 262 222 262 322 230 / 60 262 212 262 312 15 380 - 415 / 50
460 / 60262 614 262 714 8611 6611 7611 *7** 500 / 50 262 514 262 814 380/ 60 262 664 262 784 230 / 60 262 604 262 724 18.5 380 - 415 / 50
460 / 60262 615 262 715 8611 6611 7611 *7** 500 / 50 262 515 262 815 380/ 60 262 665 262 785 230 / 60 262 605 262 725 22 380 - 415 / 50
460 / 60262 616 262 716 8611 6611 7611 *7** 500 / 50 262 516 262 816 380/ 60 262 666 262 786 230 / 60 262 606 262 726 26 380 - 415 / 50
460 / 60262 233 262 333 8611 6611 7611 *7** 500 / 50 262 273 262 373 380/ 60 - 262 323 30 380 - 415 / 50
460 / 60262 617 262 717 8611 6611 7611 *7** 500 / 50 262 517 262 817 380/ 60 262 667 262 787 230 / 60 - 262 727 37 380 - 415 / 50
460 / 60262 618 262 718 8711 6711 7711 STANDARD 500 / 50 262 518 262 818 380/ 60 262 668 262 788 230 / 60 - 262 728 - * VFD operation is only allowed up to 460V supply voltage, for higher voltages please consult Franklin Electric Europa GmbH
- ** For VFD operation PE2/PA mandatory!
6" Rewindable Motors 50 Hz Performance Data
PN
[kW]Thrust
F[N]UN
[V]nN
[min-1]IN
[A]IA
[A]η(Eff.)[%]
at % loadcosφ(Pf.)
at % loadTN
[Nm]TA
[Nm]50 75 100 50 75 100 4 15500 380 2910 10.4 48 71 75 76 0.59 0.71 0.78 13.1 15.5 400 2930 10.6 51 68 73 76 0.53 0.65 0.73 13.1 17.3 415 2930 10.9 53 65 72 76 0.5 0.61 0.69 13 18.8 5.5 15500 380 2860 13.7 48 74 76 75 0.67 0.78 0.83 18.3 15.5 400 2890 13.3 51 72 76 76 0.62 0.74 0.81 18.2 17.3 415 2890 13.4 53 71 75 75 0.59 0.71 0.78 18.1 18.8 500 2890 10.6 41 72 76 76 0.62 0.74 0.81 17 18 7.5 15500 380 2860 18.3 59 77 78 76 0.7 0.8 0.84 25 19.2 400 2880 17.7 63 75 78 77 0.65 0.76 0.82 24.8 21.5 415 2890 17.7 65 73 77 77 0.61 0.73 0.8 24.7 23.4 500 2880 14 50 75 78 77 0.65 0.76 0.82 22 25 9.3 15500 380 2850 22 74 79 80 78 0.71 0.8 0.84 31.1 25.9 400 2870 21.4 78 78 79 78 0.64 0.76 0.82 31 29 415 2880 21.2 81 76 79 78 0.6 0.72 0.8 30.9 31.4 500 2870 17.1 62 78 79 78 0.64 0.76 0.82 29 31 11 15500 380 2860 25.8 93 78 80 78 0.71 0,8 0.85 36.7 31.5 400 2880 25.2 98 77 80 79 0.65 0.76 0.83 36.4 35.3 415 2890 25.1 102 75 78 79 0.61 0.73 0.8 36.3 38.2 500 2880 20 79 77 80 79 0.65 0.76 0.82 35 36 13 15500 380 2880 30.1 118 80 81 80 0.68 0.79 0.84 43.1 45 400 2900 29.6 125 78 80 80 0.61 0.74 0.81 42.8 50.3 415 2900 29.7 130 76 79 80 0.57 0.7 0.78 42.7 54.6 500 2900 23.7 100 78 80 80 0.61 0.74 0.81 50 43 15 15500 380 2880 33.9 140 81 82 81 0.71 0.81 0.85 49.7 53.9 400 2890 33.1 148 79 81 81 0.65 0.77 0.83 49.4 60.4 415 2900 33 154 77 80 81 0.6 0.73 0.81 49.3 65.5 500 2890 26.4 119 79 81 81 0.65 0.77 0.83 60 49 18,5 15500 380 2860 42.3 172 81 82 81 0.68 0.78 0.84 61.7 75.2 400 2880 42 182 78 81 81 0.61 0.74 0.8 61.2 84.3 415 2890 42.5 189 76 79 80 0.57 0.7 0.77 61.1 91.3 500 2880 33.6 146 78 81 81 0.61 0.74 0.8 84 61 22 15500 380 2880 49.1 218 82 84 83 0.68 0.78 0.84 72.6 91.2 400 2900 49 231 80 82 82 0.61 0.73 0.8 72.5 102.2 415 2910 49.6 240 77 81 82 0.56 0.69 0.77 72.2 110.7 500 2900 39.2 185 80 82 82 0.61 0.73 0.8 102 72 26 15500 380 2880 57.5 268 83 84 83 0.68 0.79 0.86 86 120.4 400 2900 56.7 284 81 83 83 0.61 0.74 0.83 85.6 134.7 415 2910 57.3 296 78 82 82 0.56 0.69 0.8 85.3 146.1 500 2900 45.7 227 80 83 83 0.61 0.74 0.81 135 86 30 27500 380 2900 66.4 328 82 84 83 0.67 0.78 0.84 98.8 135 400 2910 66.4 347 80 83 83 0,6 0.73 0.8 98.4 151 415 2910 67.5 361 77 81 82 0.55 0.68 0.77 98.2 163 500 2910 53.2 277 80 83 83 0.6 0.73 0.8 151 98 37 27500 380 2890 82 409 83 84 83 0.67 0.78 0.85 122.1 192.8 400 2900 81.9 433 80 83 83 0.6 0.72 0.8 121.6 215.8 415 2910 83.9 450 77 81 82 0.55 0.68 0.76 121.3 234 500 2900 65.6 346 80 83 83 0.6 0.72 0.8 216 122 6" Rewindable Motors 60Hz Performance Data
PN
[kW]Pmax
[kW]Thrust
F[N]UN
[V]nN
[min-1]IN
[A]IA
[A]η(Eff.)[%]
at % loadcosφ (Pf.)
at % loadTN
[Nm]TA
[Nm]50 75 100 50 75 100 4 4.6 15500 230 3520 21 106 70 75 77 0.52 0.64 0.73 12.5 18.6 380 3530 13.3 61 66 72 77 0.51 0.63 0.71 12.4 15 460 3520 10.1 51 70 76 78 0.56 0.67 0.75 12.5 15.3 5.5 6.3 15500 230 3490 26.1 106 74 78 78 0.61 0.73 0.8 17.3 15.9 380 3480 15.6 61 76 78 78 0.64 0.75 0.82 17.3 15 460 3480 12.9 51 74 77 77 0.65 0.76 0.82 17.3 15.1 7.5 8.6 15500 230 3490 35.9 146 75 79 79 0.58 0.71 0.78 23.6 22.4 380 3480 20.8 81 76 79 79 0.64 0.75 0.81 23.6 20.2 460 3470 17.2 64 75 78 78 0.67 0.77 0.82 23.7 19.4 9.3 10.7 15500 230 3490 44.4 183 75 79 79 0.59 0.71 0.78 29.3 28.9 380 3460 25.2 100 77 80 80 0.64 0.75 0.82 29.4 25.9 460 3460 20.8 78 78 80 80 0.67 0.78 0.82 29.4 24.4 11 12.7 15500 230 3490 51.2 220 77 80 81 0.6 0.72 0.79 34.6 35.6 380 3510 17 129 77 81 81 0.62 0.74 0.81 34.5 34.3 460 3480 25 98 78 81 80 0.68 0.77 0.83 34.7 31.5 13 14.9 15500 230 3500 62.4 288 76 80 81 0.55 0.68 0.76 40.7 50.5 380 3490 35.1 164 77 81 82 0.59 0.71 0.82 40.7 47.2 460 3490 29 125 78 81 81 0.65 0.76 0.82 40.9 43.3 15 17.3 15500 230 3500 65.9 325 80 83 83 0.63 0.74 0.81 47 59.5 380 3490 39.1 188 81 83 83 0.66 0.77 0.82 47.2 56.5 460 3490 32.1 151 80 83 83 0.68 0.78 0.84 47.1 55.6 18,5 21.3 15500 230 3490 85.4 402 77 81 82 0.59 0.71 0.78 58.1 81.8 380 3490 52.5 249 76 80 81 0.58 0.7 0.77 58.1 83.6 460 3480 40.6 184 80 82 82 0.65 0.76 0.81 58.4 74.5 22 25.3 15500 230 3510 100.2 520 82 84 84 0.65 0.74 0.77 68.8 96.6 380 3500 57.1 309 82 84 84 0.67 0.75 0.82 68.8 94.9 460 3500 47.1 232 83 84 84 0.72 0.79 0.82 69.1 85.8 26 29.9 15500 230 3510 118.3 657 83 85 85 0.63 0.72 0.76 81.3 135 380 3500 68.1 360 83 85 85 0.62 0.74 0.83 81.6 121.4 460 3500 55.7 287 83 85 85 0.64 0.76 0.84 81.6 117.2 30 34.5 27500 230 3510 135.7 758 78 82 83 0.58 0.71 0.78 93.8 139.6 380 3510 78 436 79 83 84 0.62 0.74 0.81 93.9 132.9 460 3510 64.4 346 81 84 84 0.64 0.75 0.82 94 126.4 37 42.6 27500 230 3510 169.9 937 77 81 82 0.59 0.71 0.78 115.8 193.6 380 3500 97.8 567 77 81 82 0.59 0.71 0.81 115.8 193.6 460 3500 79.1 430 82 84 85 0.63 0.75 0.81 116 177.8 6" Rewindable Motors - Lenghts and Weights
P
[kW]Motor Lengths Motor weights [kg] Motor Shipping Size L [mm] 304SS / 316SS /904L 304SS / 316SS / 904L B
[mm]H
[mm]L
[mm]Motor incl. pack 4 679 43 49 158 316 908 5,5 679 43 49 7,5 699 45 51 9,3 729 49 55 11 759 53 59 13 809 57 64 158 316 1138 15 854 61 68 18,5 899 66 73 22 989 77 84 26 1094 88 97 158 316 1438 30 1194 98 107 37 1274 105 114 -
6" Rewindable Motors - Motor Leads DOL*
PN
[kW]St.# Ø
[mm2]H / B
[mm]Length
[m]Lead Mod.- Nr. Motor Design up to 12.2012 Motor Design starting 01.2013 Lead seal Kit
Cast Iron/304SSLead seal Kit
316 SSLead seal Kit
904 LLead seal Kit
(all Material version)4 - 13 1 4G2.5 7.0 x 19.0 4 308 710 100 308 660 801 308 660 821 308 660 831 308 660 811 15 - 22 1 4G4 8.2 x 23.0 4 308 710 101 308 660 802 308 660 822 308 660 832 308 660 812 26 - 37 1 4G6 9.0 x 25.0 4 308 710 103 308 660 803 308 660 823 308 660 833 308 660 813 - For PE2/PA motors additionally the special Tape 700 541 688 is absolutely necessary
- *Cables are designed for submerged operation. For air operation please consult Franklin Electric.
6" Rewindable Motors - Motor Leads YD*
PN
[kW]St.# Ø
[mm2]B / H
[mm]Length
[m]Lead Mod.- Nr. Motor Design up to 12.2012 Motor Design starting 01.2013 Lead seal Kit
Cast Iron/304SSLead seal Kit
316 SSLead seal Kit
904 LLead seal Kit
(all Material version)4 - 22 1 3X2,5 7,3 x 15,3 4 308 710 104 308 660 806 308 660 826 308 660 836 308 660 816 1 4G2,5 7,0 x 19,0 4 26 - 30 1 3X4 8,5 x 17,8 4 308 710 105 308 660 807 308 660 827 308 660 837 308 660 817 1 4G4 8,2 x 23,0 4 37 1 3X4 8,5 x 17,8 4 308 710 106 308 660 807 308 660 827 308 660 837 308 660 817 1 4G4 8,2 x 23,0 4 - For PE2/PA motors additionally the special Tape 700 541 688 is absolutely necessary
- *Cables are designed for submerged operation. For air operation please consult Franklin Electric.
6" Rewindable Motors - Ground Lead*
PN
[kW]Ø
[mm2]Size [mm] Type Qty. L
[m]Part Numbers 304SS/316SS all Ratings 1G10 mm² D 6,1 mm (±0,3) VDE/KTW 1 4 308 055 040 - * only for 304SS and 316SS Motors
6" Rewindable Motors - Lead opening seal Kit
Lead opening seal Kit Motor Design up to 12.2012 Motor Design starting 01.2013 4 - 37 kW DOL / Y∆ Cast Iron-304SS Kit 316 SS Kit 904 L Kit
(all Material version)308 660 805 308 660 825 308 660 835 308 660 815 -
CAD - Drawings
