CEE motor protection plug contactor up to 7,5kW
CEE motor protection plug contactor up to 7,5kW
CEE motor protection plug contactor up to 7,5kW
The CEE motor protection plug up to 7,5kW provides reliable protection for thermal over-loads and short circuits. It is used mainly for switching and protection of three-phase AC motors up to 7,5kW (400V) on pumps and industrial motors etc...
-
Technical data:
- Enclosure material: PC/ABS
- Degree of protection: IP44
- Temperature range: -25°C up to +40°C
- IK standard acc. to EN50102: IK09
- Cable entry:
- 16A: M25 (gland capacity: 13–18mm)
- 32A: M32 (gland capacity: 12–21mm)
- M16 cable gland (gland capacity: 5–10mm) for float switch (separate drill hole marking for a further M16 cable gland e.g. for thermal contact)
- ATTENTION: For CEE plugs 32A and an overload release less than 6A Pre fuse 25A max.
Related Products
Model numbers
Mod. Nb. Description 308004051 CEE MS 1.6-2.4A 16A PW 4KW SCHÜTZ 308004052 CEE MS 2.4-4.0A 16A PW 4KW SCHÜTZ 308004053 CEE MS 4.0-6.0A 16A PW 4KW SCHÜTZ 308004054 CEE MS 6.0-10A 16A PW 5.5KW SCHÜTZ 308004055 CEE MS 9.0-12A 16A PW 5.5KW SCHÜTZ 308004056 CEE MS 12-16A 16A PW 7.5KW SCHÜTZ 308004057 CEE MS 6.0-10A 32A PW 7.5KW SCHÜTZ 308004058 CEE MS 9.0-12A 32A PW 7.5KW SCHÜTZ 308004059 CEE MS 12-16A 32A PW 7.5KW SCHÜTZ Notes to observe before use:
- Only a qualified electrician person is allowed to connect up the unit or remedy any faults on the unit.
- Always disconnect the unit from the mains before you open it.
- Motor connections as per terminal diagram
- After the switch triggers it may take several seconds before the unit can be reac-tivated as the bimetal contacts have to cool down again.
- CEE motor protection plug without carrying handle conform to IEC 60439-4
-
