8" Rewindable Permanent Magnet Motors
8" Rewindable Permanent Magnet Motors
The 8" Synchronous rewindable motor is characterized by up to 8% (system up to 11 %) efficiency. The submersible motor’s permanent magnet equipped rotor eliminates rotor losses thus significantly reducing motor current and heat rise. In many cases, reduced motor current equals less drop cable cross sectional area further reducing overall installation cost. Excellent partial-load efficiency of permanent magnet motors allows the entire power range to be covered with only a few different motor sizes, thus offering important stock-keeping advantages.
A special diaphragm ensures pressure compensation inside the motor. The Sandfighter® SiC seal system is standard. For applications in aggressive media, motors made of 316SS and 904L are available.
- * in comparsion to asynchronous technology
-
BENEFITS & FEATURES
- 8" double flange NEMA mounting design
- High efficiency electrical design for low operation costs
- SandFighter™ sealing system with SIC mechanical seal and sand slinger
- Factory filled with Franklin’s FES93 motor fill solution for frost protection down to -15 °C storage temperature
- Drinking water approvals
- Standard Motor: WW- Water well Design (Stator 304SS / Castings - CI Powder coated)
- Stainless steel splined shaft
- Liquid lubricated radial bearings and High capacity Kingsbury type 45 kN thrust bearing for 100 % maintenance free operation
- Pressure-equalizing diaphragm, spring pre-loaded
STANDARD SPECIFICATION
- Ratings: 75 / 100 / 130 kW (100 Hz - 3000 rpm, 120 Hz - 3600 rpm)
- Max. storage temperature - 15 °C to + 60 °C
- Standard motor with PE2/PA winding insulation
- Nominal ambient temperature: 30 °C with 0.5 m/s cooling flow
- System Supply Voltage: 400 V (100 Hz) / 460 V (120 Hz)
- Voltage Tolerance: ± 10 % UN
- Protection IP68
- Motor protection: DIN 61947-4-1
- Frequency of starts: 10 starts/ hour (with min. 3 minutes resting time), equally distributed
- DOL-start
- All motors with factory installed leads, motor lead length: 6 m
- Motors installation orientation: Vertical / horizontal (shaft end heightened)
- Rotation counter clock wise facing shaft end (rotation reversible)
OPTIONS
- Higher-graded materials: 316SS, 904L
- Special voltages
- PT100 temperature sensor (retrofitable)
- VFD PT100 Plug-in Card (308 170 202) necessary
- Special lead lengths
-
8" Rewindable PM Motors - Model Numbers*
PN [kW] 400V / 100 Hz WW*
Motor model number400V / 100 Hz 316SS
Motor model number400V / 100 Hz 904L
Motor model number75 263 014 5311 263 014 6311 263 014 7311 100 263 016 5311 263 016 6311 263 016 7311 130 263 018 5311 263 018 6311 263 018 7311 - * WW (Water well)- Stator 304SS / Castings - CI Powder coated (see material description in the catalog)
8" Rewindable PM Motors 400V - 100 Hz Performance Data
PN
[kW]UN
[V]Thrust
F [kN]nN
[min-1]IN
[A]IA / IN* η
[%]PF TN
[Nm]TA / TN* 45 400 45 3000 74 1 93,3 0,96 143 1 55 400 45 3000 91 1 93,3 0,96 175 1 67 400 45 3000 112 1 93 0,96 213 1 75 400 45 3000 128 1 92,5 0,96 239 1 75 400 45 3000 129 1 93,5 0,95 239 1 83 400 45 3000 143 1 93,3 0,95 264 1 93 400 45 3000 162 1 93 0,95 296 1 100 400 45 3000 178 1 92,7 0,95 319 1 100 400 45 3000 176 1 94,2 0,94 319 1 110 400 45 3000 193 1 94,2 0,94 350 1 130 400 45 3000 229 1 94 0,94 413 1 - Performance data are based on measurements with Franklin Electric original equipment!
- *Since this is an integrated system (motor plus electronics) these figures relate to VFD input
8" Rewindable PM Motors 500V - 100 Hz Performance Data
PN
[kW]UN
[V]Thrust
F [kN]nN
[min-1]IN
[A]IA / IN* η
[%]PF TN
[Nm]TA / TN* 45 500 45 3000 60 1 93,2 0,95 143 1 55 500 45 3000 74 1 93,2 0,95 175 1 67 500 45 3000 91 1 93 0,95 213 1 75 500 45 3000 103 1 92,5 0,95 239 1 75 500 45 3000 105 1 93,5 0,94 239 1 83 500 45 3000 116 1 93,3 0,94 264 1 93 500 45 3000 131 1 93,2 0,94 296 1 100 500 45 3000 143 1 92,9 0,94 319 1 100 500 45 3000 140 1 93,9 0,95 319 1 110 500 45 3000 154 1 93,8 0,95 350 1 130 500 45 3000 183 1 93,7 0,95 413 1 - Performance data are based on measurements with Franklin Electric original equipment!
- *Since this is an integrated system (motor plus electronics) these figures relate to VFD input
8" Rewindable PM Motors 100 Hz - Winding data
PN
[kW]UN
[V]Mod.-No.
WindingkitTurns per coil Wire diameter
[mm]Type of Isolation Group connection Total Wire length
[m]Resistance coil
[Ω]Resistance
DOL (U1-V1) [Ω]75 400 327 154 999 16 2,6/3,6/3,9 (2GR II) PE2/PA Parallel Y 350 0,146 0,167 500 327 151 999 20 2,3/3,5 (2GR II) 350 0,235 0,235 100 400 327 155 999 12 2,0/3,1&2,1/3,3 (2GR II) PE2/PA Parallel Y 260 0,103 0,167 500 327 144 999 17 2,5/3,8 (2GR II) 350 0,213 0,213 130 400 327 156 999 20 2,3/3,2/3,5(4GR II) PE2/PA Parallel Y 486 0,115 0,121 500 8" Rewindable PM Motors - Dimension
PN
[kW]Motor Lenghts*
L [mm]Motor Weights
[kg]Motor Shipping Size
[mm]WW / 316 / 904L WW / 316 / 904L Incl. Pack [kg] B H L 75 1205 150 179 301 448 1596 100 1316 169 198 1596 130 1482 204 236 1996 - * Details see catalog (pdf)
-
8" Rewindable Motors - DOL Motor Leads*
kW Ø
[mm²]B / H
[mm]Lengths
[mm]Qty. Lead Mod.- Nr. Lead seal Kit WW/316
Mod.- Nr.Lead seal Kit 904L
Mod.- Nr.75 4G16 B 38 6 1 308 710 108 308 660 618 308 660 620 H 12,8 100 4G25 D Ø 32 6 1 308 710 140 308 660 633 308 660 634 130 3RD 1X35 + Ground lead 1x35 D Ø 15.3 6 1 309 710 151 309 660 641 309 660 642 - For this standard PE2/PA motors must additionally ordered the specialtTape 700 541 688, is absolutely necessary.
- *Cables are designed for submerged operation. For air operation please consult Franklin Electric.
8" Rewindable Motors - Lead opening seal kit
Kit 8" Rew Motors Mod.- Nr.: WW/316 308 660 617 904L 308 660 625 -
CAD - Drawings
